Fabric Stain & Spot Remover | Greening the Cleaning

A concentrated stain/spot remover and pre-spray. Penetrates and dissolves most stains and soils on carpet and fabric. Great for oils, inks and general soils.

Product Details

Applications / Where to Use: Use for general purpose stains with a trigger sprayer.

Color: Clear

Dilution: RTU

Fragrance: None

Product Codes / Available Sizes:
DIC 26 640.22 / 12x1 RTU qt.Cs

Ingredients: Sodium Gluconate, Sodium Bicarbonate, Sodium Carbonate, Dipropylene Glycol Monomethyl Ether, D-Glucopyranoside, 5-Chloro-2-methyl-4-isothiazolin-3-one (1.1-1.4%), 2-Methyl-4-isothiazolin-3-one (0.3-0.5%), Magnesium Chloride (1.0-1.2%), Magnesium nitrate (1.4-2.0%),Copper nitrate (1500-1700ppm), Water (95-97%), Fragrance

SDS:  Carpet Fabric Stain Remover (PDF)

Directions

Carpets and Upholstery

Apply undiluted on stained area. Agitate with carpet brush from outside of stain inward. Dab area with clean white cloth until excess liquid is absorbed. Extract with clean, hot water. Repeat if necessary.

Carpet Extraction Pre-Spray

Dilute one quart per 1 gallon of unheated tap water and spray solution onto soiled traffic areas. Allow pre-spray to penetrate 5-10 minutes, but no longer than 10 minutes as dry-back may occur. Extract with clean water and vacuum after carpet dries to remove any remaining residue.